Your INSiGHT neuroPULSE (HRV) is a Class II medical device that collects three Autonomic Nervous System(ANS) biometric signals simultaneously.
Heart Rate, GSR (arousal), and Temperature sensors collect data over 1-5 minutes intervals. This combination assures that HRV can be calculated in a calm, resting state. The ANS activity and balance is used to monitor a patient’s adaptive reserve.
neuroPULSE scans are used when calculating the CORESCORE.
Push once to turn on. Push and hold for 5 seconds to turn off.
For use with spineSENSE algometer only.
Use only when advised by technical support.
Shows charging state
Insert charging wire. Instrument cannot scan when charging.
Maintains stable finger position; flashes when exam complete and when ready for use.
Positions middle finger under sensor array cover.
First and Fourth fingers rest on these GSR sensors.
Beneath sensor array cover. Third finger tip activates sensors.
Ear Clip/Finger Sleeve sensors plug in here.
Newborn/infant scanning; clips to ear, finger or toe pulse points. Deactivates GSR collection.
Pediatric/child scanning; Deactivates GSR collection.
Your INSiGHT neuroCORE (EMG) is a Class II medical device that measures the neuro-motor activity in the muscles along the spine and calculates postural energy expenditure. Patients are primarily scanned in the seated position. neuroCORE scans are used when calculating the CORESCORE.
Push in to turn the instrument on. Pull trigger to take readings. Hold in for 5 seconds to turn off the instrument.
Insert charging cable. neuroCORE cannot scan when charging.
Displays Red(Left) and Blue(Right) sEMG activity; spinal segment; signal stability indicators; redo segment levels.
3 electrodes (upper 2 collect EMG signals; lower is ground; squeezable to ensure complete electrode contact.
Set sensors to width of spine.
Position one hand to pull trigger; When scanning in C/T region, other hand supports sensors to ensure contact.
Add Isopropyl alcohol; used to dampen sensors while scanning.
Your neuroTHERMAL is a precision, infrared thermographic Class II medical device. It is designed to measure temperatures on either side of the spine and uses Synapse software to calculate and graph the temperature differences. neuroTHERMAL scanning identifies whether vertebral subluxations are affecting neurological regulation of the organs and glands. neuroTHERMAL scans are used when calculating the CORESCORE.
Push to turn instrument on and take readings. DO NOT hold continuously while doing a rolling thermal exam. Hold for 5 seconds to turn off.
Insert charging cable. Instruments cannot scan when charging.
Left wheel is geared to calculate distance. DO NOT lubricate either wheel.
Contain infrared lens. DO NOT touch skin while scanning.
Detects radiant heat energy.
Set to width of spine.
Lifts hair and keeps sensor blocks from touching skin.
Hold at 90 degrees to spine when scanning.
The INSiGHT Bridge uses Bluetooth to pair your INSiGHT instruments and WiFi to connect to your office network and to the internet through your router.
Attach immediately.
Adapter is suitable for 110V-220V supply. Use plug adapter only when needed (International power converter not necessary). The INSiGHT Bridge requires a wired, power supply.
Bridge is active.
Media Access Control address:12 digit network identifier.
Connect ethernet cable directly to office router.
For charging instruments; insert dongle here when needed.
Positioning of INSiGHT Bridge
Rebooting: After updates etc. rebooting the bridge may be necessary. Remove power supply plug from back of bridge. Wait 10 seconds; reconnect to power source